- Tel: 0086-021-37901188
- E-mail: info@triowin.com
- whatsapp: +86 13301885621
- wechat: 13301885621
The purpose of standardisation is to give the milk a defined, guaranteed fat content. Common values are 1.5% for low-fat milk and 3% for regular grade milk, fat contents as low as 0.1 and 0.5 % is skimmilk. The fat is a very important economic factor. Consequently, the standardisation of milk and cream must be carried out with great accuracy. Some options applicable is the continuous fat standardisation.
Standardisation
The purpose of standardisation is to give the milk a defined, guaranteed fat content. Common values are 1.5% for low-fat milk and 3% for regular grade milk, fat contents as low as 0.1 and 0.5 % is skimmilk. The fat is a very important economic factor. Consequently, the standardisation of milk and cream must be carried out with great accuracy. Some options applicable is the continuous fat standardisation.
Pasteurisation
If pasteurization carried out correctly, will give milk with longer shelf life. Temperature and pasteurisation holding time are very important factors which must be specified precisely in relation to the quality of the milk and its shelf-life requirements. The pasteurisation temperature for homogenised, HTST pasteurised, regular grade milk is usually 72 – 75C for 15 – 20 sec. Pasteurisation requirement is that the heat treatment must guarantee the destruction of unwanted micro-organisms and of all pathogenic bacteria without the product being damaged.
Homogenisation
The purpose of homogenisation is to disintegrate or finely distribute the fat globules in the milk in order to reduce creaming. Homogenisation may be total or partial. Partial homogenisation is a more economical solution, because a smaller homogeniser can be used.
Benefit
· * Opportunity to realize products with customized recipes.
· * Opportunity to produce more than one product with the same processing line.
· * Very short holding times at pasteurizing temperature.
· * Wide customization of the final product.
· * Maximum yield, minimum production waste.
· * Highest energy savings thanks to the most advanced technologies.
· * Complete line supervision system through monitoring of every process phase.
* Recording, visualization and printing of all daily production data.
Features
Working capacity |
from 10 tons/d up to 100 tons/d |
Products |
Liquid milk products Pre treatment for butter, milk powder, ice cream, cheese, soymilk, condensed milk |
Equipments
-
* Tubular pasteurizer
-
* Plate pasteurizer
-
* Deodorizer
-
* Centrifuge separator
-
* Homogenizer
-
* Tanks
-
Balance tank
-
Storage tank